0
0
0

HC-05 Bluetooth Module

7,300.00

Out of stock

  Ask a Question
SKU: 41719 Category: Tags: , , ,
Guaranteed Safe Checkout
Extra Features
  • Premium Quality
  • Secure Payments
  • Satisfaction Guarantee
  • Nationwide Shipping within Nigeria
Welcome to the HC-05 Bluetooth Module, a cutting-edge wireless communication solution designed for Arduino and electronic projects.  Are you in Nigeria and have you tested the HC-05 Bluetooth Module? This module offers a reliable and efficient way to connect devices wirelessly, making it perfect for remote control, robotic, and IoT applications. With its compact design and easy-to-use interface, the HC-05 Bluetooth Module is popular among electronics enthusiasts and professionals.

Features of HC-05

  • The HC-05 Bluetooth Module enables wireless communication between devices up to 10 meters apart.
  • Designed specifically for Arduino boards, making it easy to integrate into your projects.
  • It is small in size and lightweight, perfect for embedded systems and robotics projects.
  • Simple setup and configuration, no need for extensive technical knowledge.
  • Supports master and slave modes, allowing for flexible communication configurations.
  • Simple to use Bluetooth SPP (Serial Port Protocol) module
  • Facilitates data transfer between Arduino and devices
  • Home Automation capabilities

HC-05 Specifications

  • Typical -80dBm sensitivity
  • Up to +4dBm RF transmit power
  •  Operating Voltage: 3.3V to 5V
  • Range: <100m
  • PIO (Programmable Input/Output) control
  • UART interface with programmable baud rate.
  •  Integrated antenna
  • Edge connector.

Benefits of HC-05

  • Wireless communication: Eliminate the need for cables and wires, making your projects more flexible and convenient.
  • Cost-effective: Save time and money by reducing the need for wiring and cables.
  • Increased safety: Reduce the risk of short circuits with wireless communication.
  • Innovative applications: Enable remote control, robotic, and IoT applications easily.

Description of HC-05

The HC-05 Bluetooth Module is a compact and lightweight wireless communication solution designed for Arduino and electronic projects. With its easy-to-use interface and compact design, it’s perfect for embedded systems, robotics, and IoT applications. The module supports master and slave modes, allowing for flexible communication configurations.
  • Default Settings

    • Default Name: HC-05
    • Default Pincode (Password): “1234”
    •  Default Mode: Data Mode
    • The default baud rate for Slave Mode: 9600
  • AT Command Mode

    •  Used to change settings like password, baud rate, and device name.
    • Connect the “Key/EN” pin to High (VCC) for command mode.
    • The default baud rate in command mode is 38400bps
  • AT Commands

    • Checking communication: AT
    • Change Password: AT+PSWD=xxxx
    • Change Bluetooth Device Name: AT+NAME=xxxx
    • Change Baud rate: AT+UART=Baud rate, stop bit, parity bit
    • Check version: AT+VERSION?
    • Check default settings: AT+ORGL

HC-05 Applications

  • Robotics: Control robots wirelessly with ease.
  • Remote control: Use the HC-05 Bluetooth Module for remote control applications.
  • IoT projects: Enable wireless communication for IoT projects.
  • Arduino projects: Perfect for Arduino-based projects requiring wireless communication.

HC-05 Pin Configuration and Description

HC-05 Pin Configuration and Description
HC-05 Pin Configuration
  • STATE: Indicates connection status
  • RXD: Receive data serially
  • TXD: Transmit serial data
  • GND: Ground pin
  • VCC: Power supply (5V or 3.3V)
  • EN/Key: Enable pin for command mode

How to Use HC-05

  1.  Connect the HC-05 Bluetooth Module to your Arduino board.
  2. Set the module to master or slave mode using the EN pin.
  3. Pair the module with another HC-05 Bluetooth Module or a Bluetooth device.
  4. Send and receive data wirelessly using the TXD and RXD pins.

HC-05 FAQ

  • What is the range of the HC-05 Bluetooth Module? Up to 10 meters.
  • Is the HC-05 Bluetooth Module compatible with other Arduino boards? Yes, it’s compatible with most Arduino boards.
  • How do I configure the HC-05 Bluetooth Module? Use the EN pin to set the module to master or slave mode.

Ready for the power of wireless communication in your Arduino projects?

Order your HC-05 Bluetooth Module today and experience the freedom and flexibility it offers! Don’t forget to explore our “Tutorials” section for inspiration and guidance. Contact Us for a Custom Quote or Learn More and Discover the Benefits of the HC-05 Bluetooth Module.

Reviews

There are no reviews yet.

Be the first to review “HC-05 Bluetooth Module”

General Enquiries

There are no enquiries yet.

Shopping cart0
There are no products in the cart!
Continue shopping